The display of x-ray images and cross-sectional images is the primary task of the RX250. A DICOM characteristic curve is preset in the factory and can be refreshed through automatic calibration. The RX250 can display radiological exposures exactly.
Thanks to the high 2 Megapixels (color) resolution, a strong contrast ratio of 1400:1 and stable brightness of up to 800 cd/m2, the monitor offers excellent image quality. Even the differences between the finest details are shown – regardless of your viewing angle. This is a great advantage if multiple physicians are looking at the screen.
Consistently secure image quality
The optional EIZO RadiCS software to secure image quality enables extensive maintenance and testing of monitors and includes calibration, acceptance and constancy testing, and the archiving of all areas. If you are working on multiple stations, the use of the RadiNET Pro is recommended. This can be used to centrally control the calibration of all monitors, including data history. This saves you a significant amount of time and ensures consistently high image quality across the entire setup. The basic version RadiCS LE is already included with the RadiForce GX, RX, and MX/MS models.
LCD panels with a high brightness level tend to have more blurry image rendering thanks to over-framing than would be possible in comparison with an acquired exposure. Therefore, EIZO offers blur reduction anchored in monitor hardware. It retrieves details lost in the contours on the screen, meaning that the image is rendered as clearly as possible.
One billion color tones thanks to 12 bit LUT
Color rendering is controlled by a 12 bit look-up table (LUT), up to 10 bits of which are available in the DisplayPort connection. This produces a resolution with a maximum of 1 billion color tones. The rendering characteristic and fine structures required for diagnostics can therefore be precisely identified.
Without 12 bit LUT
With 12 bit LUT
Uniform brightness over the entire screen
The monitor shines thanks to its high color purity and uniform illumination. This is down to the Digital Uniformity Equalizer (DUE), which corrects imbalances automatically, pixel by pixel. Gray and color tones of radiological and other medical images are correctly rendered over the entire display. This is vital for diagnostics.
Balanced image quality thanks to an integrated front sensor
The precise calibration of white point and tone value characteristic curve is provided by an integrated front sensor (IFS). This measures the brightness and grayscales and calibrates the monitor autonomously according to the DICOM standard. The sensor works automatically, without restricting the field of vision of the monitor. You can save the costs, time, and effort of maintenance and rely on a consistently balanced image quality.
Multi-monitor solutions without problems
Thanks to the signal input and output, you can link several RadiForce monitors through their DisplayPort interface. This means that you can realize multi-monitor solutions with the greatest of ease – without laborious and excessive cabling.
Secure image quality thanks to AAPM/Euref/DIN compliance
The display properties, in particular brightness and contrast, are suited to the creation of image rendering systems compliant with DIN 6868-157. The DICOM GSDF characteristic is already precisely configured in the factory. This means that grayscales are consistent, which is vital for diagnostics.
The monitor meets the strictest medical, safety, and EMC emission standards. EIZO’s QC software RadiCS enables you to perform brightness, grayscale and uniformity checks that comply with AAPM TG18, DIN 6868-157, and other QC standards.
The thin, black front housing frames are ideal for use in dark environments. They make it easier to concentrate on the display, while the white side frame of the monitor presents a fresh, clean aesthetic.
Presence sensor: Save electricity when you are not in front of the monitor
Thanks to the presence sensor, you can save electricity and help protect the environment. The sensor registers whether someone is sitting in front of the screen or not. As soon as the person leaves the workstation, the monitor turns off automatically. When the person comes back, it turns back on – fully automatically, without touching the mouse or keyboard. It is always ready for use without a waiting period.
Extended durations of use thanks to automatic shut down
The monitor has an automatic shut down option for the backlight (backlight saver). This extends the duration of use. Similar to a screen saver, the LEDs turn off when the screen is not being used.
The base allows the monitor to be tilted and turned, as well as operated in landscape or portrait form. The seamless height adjustment starts from the very bottom on the desk. This guarantees optimal ergonomics, regardless of whether you are standing or sitting in front of the screen. Despite its maximum movement possibilities, the FlexStand base always remains completely stable.
One monitor, many ports
It doesn't get easier than this: You can connect most of your devices, such as PC, laptop or cameras directly to the monitor because the monitor has a number of different ports. That makes your daily work easier.
27% Work Space Saved with Sleek Cabinet Design
The monitor's width, height, and depth were reduce by 15 mm, 37.5 mm, and 45.5 mm respectively – 27% less space than its predecessor, saving more workspace for other tasks. Reducing the width of the monitor's frame reduces eye movement when comparing side-by-side images in a dual monitor configuration.
Ambient light sensor supports the constancy test
The sensor integrated in the monitor is used to measure the ambient light and can be used for constancy tests. The prevalent illumination can be determined by the ambient light sensor with the optional RadiCS software.
Constant brightness during operation
A sensor for the backlight permanently determines the luminance of the monitor. The benefit: The defined and calibrated values are rendered exactly just seconds after the monitor is turned on and remain constant during the entire period of use. The sensor is invisibly integrated in the monitor.
EIZO is convinced of the quality of its products. The warranty for the monitors, therefore, also covers the brightness stability.
Modern LED backlight
The monitor has a modern LED backlight. This has several advantages over a conventional CCFL tube: the brightness remains uniformly high, electricity consumption is low, and the service life is significantly longer. The LED backlight is also free from mercury, making it environmentally friendly when disposed of.
For precise diagnoses: EIZO MED-X70 graphics card
The EIZO MED-X70 graphics card supports the properties, functions, and settings of the RadiForce RX250 optimally. It enables precise diagnostics and can control several monitors simultaneously. EIZO offers technical support and a warranty service for all graphics cards. Therefore, we recommend using EIZO graphics cards.
EIZO offers a brand-new, easy-to-operate comfort light for radiologists who work in dark diagnosis rooms. The soft illuminance in the background of the screen reduces the strain on the eyes that frequently occurs due to constant light-dark changes between bright screens and objects in a dark environment.
EIZO grants a five-year warranty. This is possible thanks to the highly developed production process based on a simple principle of success: sophisticated and innovative monitor technology, made from high-end materials.
2 megapixel color display with consistently higher and more stable brightness
Clearly defined images thanks to blur reduction
Automatic luminance distribution control (Digital Uniformity Equalizer)
Set up for calibration, acceptance, and consistency testing in accordance with DIN 6868-157 and QSRL
Effortless quality control and built-in calibration sensor
Lower power consumption and heat output
Light sensor to measure ambient light at the diagnostic station
Presence sensor means monitor is ready for immediate use whenever the user is in front of it
Ergonomic design with fresh, clean look
Compact dimensions and narrow bezels
RX250-BK: Anti-Glare coating, with stand, black
RX250-ARBK: Anti-Reflection coating, with stand, black
54 cm / 21.3"
1200 x 1600 (3:4 aspect ratio)
Viewable Image Size (H x V)
324.0 x 432.0 mm
0.270 x 0.270 mm
10-bit colors (DisplayPort): 1.07 billion (maximum) colors
8-bit colors: 16.77 million from a palette of 543 billion colors
Viewing Angles (H / V, typical)
178° / 178°
Recommended Brightness for Calibration
Contrast Ratio (typical)
Response Time (typical)
20 ms (on / off)
DisplayPort (daisy chain)
Digital Scanning Frequency (H / V)
31 - 100 kHz / 59 - 61 Hz
USB 2.0: Type-B
USB 2.0: Type-A x 2
AC 100 - 240 V: 50 / 60 Hz
Typical Power Consumption
Maximum Power Consumption
Power Save Mode
1 W or less
Backlight Sensor, Integrated Front Sensor, Presence Sensor, Ambient Light Sensor
Features & Functions
Digital Uniformity Equalizer
Hybrid Gamma PXL
English, German, French, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese
Net Weight (Without Stand)
Hole Spacing (VESA Standard)
100 x 100 mm
Certifications & Standards (Please contact EIZO for the latest information.)
CE (Medical Device), EN60601-1, ANSI/AAMI ES60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, CAN ICES-3 (B), RCM, RoHS, China RoHS, WEEE, CCC, EAC
510(k) Clearance for General Radiography
Monitor Quality Control Software RadiCS
Supplied Accessories (May vary by country. Please contact EIZO for details.)
DVI-D (3 m), DisplayPort (3 m)
AC power cord (3 m), USB cable (3 m), Utility Disk (RadiCS LE, PDF instructions for use, PDF installation manual), instructions for use
"The RANZCR Standards have recommendations on monitor deliverables. We’ve always needed better image quality, better resolution, and the ability to see more on our screens. EIZO has exceeded our expectations."
- Dr. Jeremy Sharr MBChB, FRANZCR (Managing Radiologist)
Dr. László Tabár recently used EIZO’s multi-modality monitors for the first time as the key teaching tool at his International Breast Seminar Series. Dr. Tabár’s Advanced Course on Multi-Modality Detection and Diagnosis of Breast Diseases with Emphasis on Breast MRI, held in Australia during November 2014, was the setting for his first EIZO RadiForce multi-modality experienc
The latest in breast cancer examinations, 3D breast tomosynthesis, is a procedure being carried out by Utsunomiya Central Clinic, where three EIZO RadiForce RX840-MG monitors are being used. Dr. Sato, Radiologist on Utsunomiya Central Clinic's administration board, assesses the usability of the monitors for breast cancer examination.